EME342 Lube Oil Conditioning System 机油温度控制系统

  • Feature

     

    EME342 机油温度控制系统适用于450KW发动机

    Conditioning Module for oil is designed for engine testbed according to the China automotive engine test GB standard. The system will supply the engine oil with the stable pressure and 50~110℃±2℃ temperature to the gas engine. There is a good safety, which is not affected by the engine’s work condition and the variational environment temperature.

    机油温度控制系统是根据国家汽车发动机试验GB标准的要求而专门设计用于发动机台架试验。此系统可为内燃机提供压力稳定且温度为50~110℃±2℃的机油温度控制。具有良好的安全性,并且不受发动机的工况及环境温度变化的影响。

    The System is designed for engine tested. The system is designed to moveable structure, in order to easy maintenance, operation, control for user. It will be place to a suitable position beside the test engine, it can’t be far to the engine, in order to avoiding the long oil pipe, because the heat loss much will affect the measure value of the sensor.

    机油温度控制系统用于发动机台架试验。考虑到用户使用和维护的方便以及控制的需要,此系统设计采用了可移动式结构;可以放置在试验发动机侧的任意适当的位置 ,但距离试验发动机不宜太远,避免机油管路过长,热量损失引起的传感器测量偏差。

     

     

    Technical

     

    Technical data
    EME342
    柴油发动机
    Nominal Performance of Combustion Engine
    450KW
    功率过小汽油发动机使用,容易出现降温速率过快现象
    Engine Circuit
    Oil connection; female thread
    1"
    Nominal flow[m3/h],approx.
    2,6
    Adjustable temperature range[℃]
    40-110
    Maximum output temperature tout,max [°C]
    120
    Minimum output temperature tout,min [°C]
    40
    Temperature Setting accuracy, steady ΔT
    +/- 2
     
    Adjustable pressure range[℃] [kPa]
     
    0-50℃
    50℃-80℃
    80℃-110℃
    600KPa
    500 KPa
    400Kpa
    Control accuracy
    +/- 1
    Nominal heating power[kW]
    4.5
    Nominal cooling capacity PT
    300KW
    Cooling Water Supply
    Cooling Water connection
    DN50
    Feed temperature[℃]
    32℃ lower than requested coolant temperature
    Flow ,approx.
    5
    Nominal Feedback pressure dPmin [kPa]
    0(效果最好)
    Nominal pressure difference dPmin [kPa]
    300
    Mechanical Data
    Dimensions(wXhXd),wall mounted
    850
    Weight
    240kg
    Color
    RAL7035
    系统采用西门子MXG461电磁调节阀定位快(<2s)、灵敏度高(>1:1000)

     

     

    Applications

     

    Scope of Supply
    Quantity
    The main part of Lube Oil Conditioning System机油温度控制系统主体
    1
    Cable20M电缆线20M
    1
    Signal wire20M 信号线20M
    1
    Delivery ,insurance 运输,保险
    1
    Scope of supply, survey report, user manual
    发货清单、出厂检验报告、安装及使用说明书
    1

     

     

    Interface
    EME342
    Power
    380VAC±10%;16A
    STARS interface STAR接口
    WAGO
    WAGO模块功能:Circuit OIL pump power supply control
    循环油泵电源控制
    Digital 开/关
    WAGO模块功能:Heater power supply control加热器电源控制
    Digital 开/关
    WAGO模块功能:报警输出
    Digital 开/关
    WAGO模块功能:PID阀门控制
    模拟量输出
    Cooling water with pressure and flow rate steady on outlet provide by consumer. For example, pressure on outlet undulate or 7℃ refrigeration water regard as cooling water on outlet; There must have special instructions when reserving the unit.
    用户提供压力流量稳定的外循环水路,如外循环水压波动过大或应用7度制冷水做外循环水;须在设备订购时特殊说明。

     

     

    Option可选件
    品牌
    主油道冷却装置
    EME
    摩擦功试验专用机油冷却升温装置
    EME
    140度高温加热模组
    EME
    7度冷冻水恒温恒压装置
    EME615
    EME条件控制集中控制器(水油中冷集中控制)
    EME
    外循环水稳压、污水隔离装置
    EME
    快速接头板
    STAUBLI
    如需可选件,请于订购前特殊说明;027-84213182武汉东测科技有限责任公司
  • 您有任何问题或要求吗?使用此表格与我们的专家联系。*这些字段是必填项。

    姓名 *

    邮箱 *

    公司或机构 *

    电话 *

    留言 *

东测科技

EME342 机油温度控制系统适用于450KW发动机 机油温度控制系统是根据国家汽车发动机试验GB标准的要求而专门设计用于发动机台架试验。此系统可为内燃机提供压力稳定且温度为50~110℃±2℃的机油温度控制。具有良好的安全性,并且不受发动机的工况及环境温度变化的影响。